Description Of The Controls; Upper Panel - Fulgor Milano FDW82102 Manual De Instrucciones

1. Description of the controls

1.1
All the dishwasher controls are grouped on the upper panel. Switch-on,
programming, switch-off etc. procedures are only possible when the door
is open.
1
2
3
4
5
6
7
2
User instructions

Upper panel

ON/OFF BUTTON
Pressing this button energises the appliance.
SELECTED PROGRAM INDICATOR LIGHTS
Illumination of this light denotes the program selected and the
occurrence of a fault (troubleshooting).
PROGRAM SELECTION BUTTON
By pressing this button in sequence it is possible to select the desired
program.
WATER HARDNESS ADJUSTMENT ON INDICATOR LIGHT
The light flashes to indicate that the appliance is in "water hardness
adjustment" mode.
SALT WARNIN LIGHT (on some models only)
If the symbol is present, illumination of this light denotes a
regenerating salt warning level.
RINSE AID WARNING LIGHT (on some models only)
Illumination of this light signals that rinse aid dispenser is empty.
ENERSAVE OPTION + EXTRA OPTION BUTTON
(see "EXTRA OPTIONS" section)
Press the button to enable/disable the option.
ENERSAVE OPTION LIGHT
Illuminates to indicate that the function is activated.