Important; Operations And Adjustment - Craftsman 152.229000 Manual Del Usuario

DONOTexpose theddflpressto rainoroperate the
in dampbcations,
MAKESUREaftpartshavebeen assembbd correctly
andarein working order,
2,
With the switch toggb removed, the switch wHU not
operate, However, shouUd the switch toggb be
removed while the ddfl press is operating, the
switch can stHU be turned OFF, but cannot be
restarted without inserting the switch toggb,
SWITCH OPERATION
Figure 8-1
FLEXUBLE LAMP
To reduce the risk of fire, use 40 watt or bss, 120 voUt,
reflector track-type fight buUb(not supplied), DO NOT
use a standard househoUd fight buUb, The reflector track-
type Hght buUbshould not extend below the lamp shade,
Figure 9-1
B
The switch (A) is located on the front of the drift press
head, See Figure 8-1, To turn the drift press ON, move
the switch up, To turn the drift press OFF, move the
switch down,
Figure 8-2
© ©
\
\
\
\,
IMPORTANT: When the machine is not in use, the
switch should be locked in the OFF position to prevent
unauthorized use,
1, Grasp the switch toggle (B) and puff it out of the
switch, See Figure 8-2,
The flexible lamp (A) operates independently of the drift
press and has its own power cord, To turn the lamp ON
and OFF, rotate the switch (B) in the clockwise direction
only, See Figure 9-1,
CAUTION: The flexible lamp housing wiii remain hot for
a few minutes after turning it OFF, Avoid contact with
housing until it is cool,
18