Important - Craftsman 351.229000 Manual De Instrucciones

• DO NOT expose the drill press to rain or operate it in
damp locations.
• MAKE SURE all parts have been assembled correctly
and are in working order.
.
With the switch toggle removed, the switch will not
operate. However, should the switch toggle be
removed while the drill press is operating, the
switch can still be turned OFF, but cannot be
restarted without inserting the switch toggle.
SWITCH OPERATION
Figure 8-1
\
The switch (A) is located on the front of the drill press
head. See Figure 8-1. To turn the drill press ON, move
the switch up. To turn the drill press OFF, move the
switch down.
Figure 8-2
B
IMPORTANT: When the machine is not in use, the
switch should be locked in the OFF position to prevent
unauthorized use.
1. Grasp the switch toggle (B) and pull it out of the
switch. See Figure 8-2.
FLEXIBLE LAMP
To reduce the risk of fire, use 40 watt or less, 120 volt,
reflector track-type light bulb (not supplied). DO NOT
use a standard household light bulb. The reflector track-
type light bulb should not extend below the lamp shade.
Figure 9-1
B
The flexible lamp (A) operates independently of the drill
press and has its own power cord. To turn the lamp ON
and OFF, rotate the switch (B) in the clockwise direction
only. See Figure 9-1.
CAUTION: The flexible lamp housing will remain hot for
a few minutes after turning it OFR Avoid contact with
housing until it is cool.
18