Connect The Maxi Day/Night Camera To Your Monitoring Device - Swann Maxi Day/Night Cam Manual De Instrucciones

Connect the Maxi Day/Night Camera to your monitoring device

These step by step instructions are provided for you to enable a quick and simple installation of
your camera. Please refer to the diagram below for component identification details.
Connect the BNC female connector on the Maxi Day/Night Camera (1b) to the
Step 1:
BNC male connector on the extension cable (3b)
Connect the BNC extension connector (3d) to the back of your DVR or monitoring
Step 2:
device. Note if you are connecting to a TV or VCR use the included BNC female to
RCA male adapter
Connect the DC Jack (1a) to the DC input on the Extension Cable (3a)
Step 3:
Connect the DC Power Connector (2a) on the Power Adapter to the Extension
Step 4:
Cable (3c)
Plug in the Power Adapter (2) to an available power outlet
Step 5:
Turn on your DVR or monitoring device and follow the manufacturers instructions
Step 6:
for viewing images. If you have an
switch the
your VCR
TV onto the channel you would normally use to view a tape or movie on your
This channel may be activated by a button on your remote that is marked L1 or L2
or possibly AV1 or AV2. Please read the
information on using their
DVR, TV, VCR or MONITOR
VIDEO IN
BNC Male 3d
3c
DC Jack
EXTENSION
3
to the channel to view the camera. To connect the camera to
TV AV
, you will need to turn the
A/V inputs.
2a
DC Plug
CABLE
BNC Male
with RCA sockets you may need to
A/V TV
VCR to the A/V Input
instructions
POWER
2
ADAPTOR
DC POWER
CONNECTOR
DC Jack
1a
3a
3b
1b BNC Female
selection and turn your
for your VCR or TV
VCR .
for more
3