POSSIBLE TROUBLES - CAUSES - SOLUTIONS
PROBLEMS
The machine doesn't catch
Insufficient Washing
Wash phase starts up even
with empty tank
Excessive exit of vegetables
from basket
Water comes out of the lid while
the machine is working
"Loading Alarm" Display
"Drain Alarm" Display
"Rinsing Alarm" Display
"Levels alarm" Display
(see page 29 for the levels
Rod's position)
CAUSES
Main switch is switched off;
Insufficient pressure
Insufficient time;
Dirty wash filter;
Dirty level probe
Unsuitable basket
The lid has not been put on;
Filters and basket not
correctly inserted;
Water tap closed
Dirty level probe
Broken solenoid valve
Dirty inlet water filter
Broken drain pump
Broken solenoid drain valve
Clogged hydraulic drain
Dirty level probe
Broken solenoid valve
Dirty level probe
Dirty inlet water filter
Blocked or dirty level probe
Damage float
Damage rod
Low inlet water pressure
FOR ANY OTHER TROUBLE, CALL SERVICE
SOLUTIONS
Put ON the main switch;
Act on flow regulator
Increase wash time;
Clean filter carefully;
Clean the level probe
Use basket with suitable mesh
Put lid on basket
Put filters and basket
in their correct places;
Open the tap
Clean the level probe
Call service
Clean the inlet water filter
Call service
Call service
Clean the drain from the dirt
Clean the level probe
Call service
Clean the level probe
Clean the inlet water filter
Clean the level probe
Call service
Call service
Check the water pressure