Firing Rate (En 267); Commercial Boilers; Test Boiler - Riello BG6.1D Instrucciones De Instalación, Uso Y Mantenimiento

4.8

Firing rate (EN 267)

The burner output is chosen from within the diagram area
(Fig. 3).
To ensure the burner works correctly, start-ups
should always occur within the relative firing rate.
WARNING
2,6
2,4
2,2
2,0
1,8
1,6
1,4
1,2
BG6.1D - BG6.1D TL
1,0
0,8
0,6
0,4
0,2
0
0,2
0,3
4 5
50 60
D9674
4.8.1

Commercial boilers

The burner-boiler combination poses no problems if the boiler
conforms to EN 303 and its combustion chamber dimensions are
similar to those provided in EN 267.
If, on the other hand, the burner is combined with a commercial
boiler that does not conform to EN 303, or where the combustion
chamber is much smaller than the dimensions set out in EN 267,
please contact the manufacturers.
4.8.2

Test boiler

The firing rate has been defined on test boilers according to EN
267 standard.
Technical description of the burner
6 7 8
70 80 90 100
The firing rates (Fig. 3) were obtained at an ambi-
ent temperature of 20 °C, at a barometric pressure
of 1013 mbar (about 0 m a.s.l.) and with the com-
bustion head regulated as indicated on page 22.
WARNING
BG7.1D
9 10 11
110 120 130
11
GB
EN 303-2
12 13 Light oil output – kg/h
140 150
Heat output – kW
Fig. 3
20137240