Scope Of Delivery; Inserting And Changing The Batteries - Zeiss Victory NV 5,6 x 62 T Modo De Empleo

Victory NV 5.6 x 62 T* with reticule

Scope of delivery

Victory NV night vision device with 5.6 x 62 T* lens
Eyepiece protection cover
Lens cover
Carrier strap
Hand strap
2 x 1.5 V AA batteries
Carrier bag with carrier strap

Inserting and changing the batteries

The energy supply of the night vision device is provided by 2 batteries,
1.5 V Type AA.
Corresponding rechargeable batteries can also be used instead of the
enclosed 1.5 V AA monocells.
To insert and change the batteries, open and remove the battery cover
(Fig.1/b) by turning the knob (Fig. 1/a) to the left (anti-clockwise). On the
underside of the device (Fig. 2/d), directly below the battery chamber, you
can find the specification for the polarity locations of the batteries. Insert the
batteries according to these specifications.
Replace the battery compartment cover (Fig.1/b), again using slight pressure,
and shut it with a right turn (clockwise) of the rotary knob (Fig. 1/a) to the
stop.
Using batteries or rechargeable batteries with different power characteristics
may result in different operating times.
When using of non-rechargeable batteries (1.5 V/2600 mAh), an operating
time of up to 80 hours can be achieved (without infrared LED).
When using rechargeable batteries (1.2 V/750 mAh), the operating time can
be reduced to 26 hours (without infrared LED).
Depending on the application conditions, such as for example low temperatures
or switching on the infrared LED, the operating time can also be significantly
reduced.
If the device is not used for a long time, the batteries should be removed in
order to prevent any damage caused by leakage of the batteries.
Only use high-quality, brand-name batteries or rechargeable batteries.
15