Inserting/Removing The Battery; Identification Of The Components - Zeiss VICTORY 8x26 T PRF Modo De Empleo

Table of contents

Identification of the components ...................................................................... 14

Scope of delivery ............................................................................................... 15

Inserting/Removing the battery.......................................................................... 15

Attaching the carry cord ................................................................................... 15
Observation with and without glasses ............................................................... 16
Focusing the aiming mark ................................................................................. 16
Metre/Yard switching......................................................................................... 16
Range estimation .............................................................................................. 17
Scan mode ........................................................................................................ 17
Range estimation accuracy ................................................................................ 17
Ballistic Information System BIS ...................................................................... 18
TM
Selection of the appropriate ballistic programme ............................................... 18
Determining the correct trajectory path ............................................................. 19
Care and maintenance ...................................................................................... 22
Spare parts ....................................................................................................... 22
Technical specifications ..................................................................................... 23
Identification of the components
1 Eye cup
2 Diopter compensation for display
3 RANGE FINDER button
4 SET button
5 Observation lens
6 Laser receiver lens
7 Battery cover/battery compartment
8 Eyelet for fixing the carry cord and the eyepiece cap
9 LED sighting mark
10 4­figure LED display
14
Scope of delivery
- Laser range finder
- Eyepiece cap
- Pouch
- Carry cord
- 3V type CR 2 lithium battery
- Optics cleaning cloth
- Instructions, guarantee card
Inserting/Removing the battery
The laser range finder is powered by a type CR 2 lithium battery.
To insert and replace the battery, unscrew the battery cover (Fig. 2/7) - using a coin or similar -
by turning anticlockwise. Insert the battery with the negative end forward (according to the
symbol in the battery compartment).
Then screw the battery cover back on by turning clockwise.
At 20 °C, a new battery will last for over 2,000 measurements.
Depending on the conditions of use, however, low
temperatures or frequent use of the scan mode for example
may result in the battery life being considerably shorter.
A low battery is indicated by the display flashing.
If the equipment will be unused for a long period, remove
the battery in order to prevent damage by leakage from the
battery. Use only high quality brand batteries.
Attaching the carry cord
To attach the carry cord, thread it through the carry cord eyelet
(Fig. 3/8) - as shown in the illustration.
15