Attaching The Carrier Strap And The Hand Strap; Attaching The Lens And Eyepiece Protective Caps; Observing With And Without Spectacles - Zeiss Victory NV 5,6 x 62 T Modo De Empleo

Instructions for use

Attaching the carrier strap and the hand strap

Eyelets for attaching the carrier strap and the hand strap are provided on
both sides of the device. Depending on the type of use, right-hand or left-
hand operation, the hand strap can be attached on the right or left side of
the device.
For operation with the right hand, one end of the carrier strap is first attached
into the eyelet on the left side (Fig. 5/i) of the night vision device, according
to Fig. 6.
Attach hand strap according to Fig. 7 – 9 in the eyelets (Fig. 5/i) on the
right-hand side of the night vision device. With the belt loop, the hand strap
can be adjusted individually to the size of the hand. Stow the belt and belt
loop in the hand strap and close hand strap with the two snap fasteners.
Attach the second end of the carrier strap to the hand strap in the eyelet
(Fig. 8/n), according to illustration Fig. 10.
For operation with the left hand, the hand strap is attached on the left-hand
side of the night vision device, and the free end of the carrier strap on the
right-hand side of the night vision device.
Attaching the lens and eyepiece protective covers
The lens and eyepiece protective covers are provided with a cord, and can be
attached to the night vision device as represented in Fig. 11.
The lens cover is attached to the free belt eyelet of the night vision device and
the eyepiece protection cover is attached to the carrier strap.

Observing with and without spectacles

The night vision device can be used both with and without spectacles and the
full visual field is offered in both cases.
For use with spectacles, the rubber eyeshield is inserted (Fig. 3/h). For use
without spectacles, the rubber eyeshield is removed (Fig. 4/h).
Both end positions are provided with a latching mechanism.
16