Maneuver-counter function
This function activates a sound signal after 2,000 operating cycles. It warns of the need to check and maintain the mechanical parts. This function is
disabled in the default setting. To activate it:
Press +, 8 appears.
1
Press +, 1 appears (function active)
3
To switch off the sound signal, disconnect and the power up the mains power supply
Automatic Closing Pre-warning function
The operator emits a sound signal for 20 seconds, before initiating the automatic closing. To activate it:
Press +, 9 appears.
1
Press -, 0 appears (function NOT active)
3
Press P, 0 appears (function NOT active).
2
Press P to save.
4
Press P, 1 appears (function active).
2
Press P to save.
4