Accessories - Gladiator GAJG36FDYG Instrucciones De Ensamblaje

2b.
Attach Mounting Brackets
Repeat steps 1 and 2 to attach the center and bottom mounting
brackets (P8) to the back of the cabinet.
NOTE: Hand tighten the nuts attaching the center and bottom
brackets. These brackets will need to be adjusted to mount the
cabinet on the wall.
The Gladiator GearRod accessory provides a hanging solution for heavy outdoor gear and other seasonal items, freeing up space
®
in your household closets for everyday items. It attaches to any of the adjustable shelves or to the top of the cabinet. The Gladiator
GearRod holds up to 100 lbs of seasonal clothing and outdoor gear wear.
To order accessories, call 1-866-342-4089 and ask for the accessory part number listed below or contact your authorized Gladiator
brand dealer. In Canada, call 1-800-807-6777.
GearRod Accessory
Order Part # GAAC36GRDSS
8
3.
Mount the Cabinet to GearWall
Panels or GearTrack
A
A. Bracket rim
NOTE: The three nuts on the center and bottom mounting
brackets must be loose enough to allow the brackets to move in
the slots.
Close the cabinet doors. Determine cabinet mounting location
on GearWall
people, engage the top bracket (P8) into the slots by lifting up,
pushing toward the wall and lowering the bracket rims into the
slots, as shown. Make sure the top bracket is fully engaged in the
slots, as shown. Open the cabinet doors. From inside the cabinet,
grasp the bolts in the center bracket and adjust the bracket
until it aligns with the slot in the GearWall
channels. Push the cabinet toward the wall and lower the center
mounting bracket into the slots. Make sure the center bracket
(P8) is fully engaged in the slot, as shown. Repeat for the bottom
bracket (P8). Using a 1/2" wrench, fully tighten the nuts attaching
the center and bottom brackets.

ACCESSORIES

®
B
B. Mounting bracket
fully engaged
panels or GearTrack channel. Using two or more
® ®
®
Channel
panels or GearTrack
® ®
®