Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Recording
Files
Preparation:
• Open
the LCD monitor to turn on the camcorder.
• Insert an SD card.
Slide
the
mode
switch
to select
NIW(video)
mode.
_,_
ress
PLAY/REC
to select
recording
mode.
PLAY/REC
[] To stop
recording
Press the START/STOP
button again.
[] To view the video
you just
recorded
Select
@ during
pause.
During
the preview,
you can delete
the
video by selecting
-_.
[] To change
the picture
quality
Change
the settings
in ]VIDEO
QUALITY].
[] To register
a file to an event
Press
START/STOP
to start
recording.
Approximate
remaining
time for recording
You can
also start/stop
recording
by
selecting
[REC]
on the LCD monitor.
(On-screen
recording
control)
[] To change
the aspect
ratio
of the image
(16:9/4:3)
Change
the settings
in [SELECT
ASPECT
RATIO].
[] To record a still
image during video
recording
Press SNAPSHOT.
• The video recording mode is automatically
selected when you turn the camcorder's
power off and
then on again.
• If the camcorder
is not operated for 5 minutes while the power is on, it turns itself off automatically
to
conserve
power.To turn the camcorder
on again when using the battery pack, close the LCD monitor
and open it again. When using the AC adapter, perform any operation such as zooming.
• After recording video for 12 consecutive
hours, recording stops automatically.To
ensure continuous
recording,
set [AUTO SWITCH REC MEDIA] to [ON] before you start recording.
• A new file will be created for every 4 GB of continuous
shooting.
• This camcorder
records video in MPEG2 format compliant
with SD-VIDEO format. This camcorder
is
not compatible
with other digital video formats.
19
Publicidad
Tabla de contenido
