Warning indications
• Set the clock. If the message still appears after setting the clock,
the battery for the clock has been depleted. Consult your nearest
JVC dealer.
• Be sure to use JVC battery packs.
• Select [OK] and select [YES] to perform formatting.
• Check the operating procedure,
and perform once again.
• Turn off the camcorder,
and turn it on again.
• Turn off the camcorder,
and turn it on again.
• Remove and re-insert the SD card. (MultiMediaCard
cannot be
used.)
• Remove any dirt from the SD card terminals.
• Insert the SD card before switching the power on.
• If the problem persists, backup all data, and then perform
formatting.
(All data is deleted).
• Stop video recording,
and then record a still image. (If an SD
card is removed or inserted during video recording,
a still image
cannot be recorded.)
• Turn off the camcorder,
and turn it on again.
• Use the AC Adapter as power supply.
39