ProKlima 26507950 Manual De Instrucciones página 62

Half open the window ， and mount the window sealing plate assembly to the window (as shown in
Fig.2 and
Fig.3).Components can be placed in horizontal and vertical direction.
Pull various components of the window sealing plate assembly open, adjust their opening distance
to bring
both ends of the assembly into contact with the window frame, and fix various
components of the
assembly.1.2 Install the window sealing plate assembly
Notes:1 ） the flat end of the exhaust pipe joints must be snapped into place.
2)The pipe cannot be distorted nor has substantial turning (greater than 45 ° ). Keep the
ventilation of the exhaust pipe not blocked.
1.3 Install the body
1 ） Move the machine with installed heat pipe and fittings before the window, and the
distance between the body
and walls or other objects shall be least 50 cm (as shown in Fig.4).
2
Figure
62
3
Figure