Ingeteam INGECON SUN 1Play TL M Serie Manual De Instalacion Y Uso página 65

Installing the unit
3. Fix the plate using fastening elements that are appropriate for the wall onto which it is to be installed.
The diameter of the holes of the plate is 7.5 mm.
4. Suspend the unit from the plate by fitting the slats in the openings on the back of the unit.
5. Mark the lower attachment point, remove the unit and drill the hole in the wall. Install the unit again and
fix the bottom attachment using a suitable fastening element. Said hole has a diameter of 7.5 mm.
6. Check that the unit is properly secured.
Once the unit has been installed correctly, the connection process will begin.
Make the connections in the following order:
1. Connection of accessories (optional).
2. AC connection.
3. DC connection.
It is mandatory to follow the order described above. Do not switch on the power until you have made
all the connections and closed the unit.
ABE2011IQM01_B - Installation and Operation Manual
Ingeteam
DE
EN
ES
FR
IT
PT
65