Assembly - Greencut PRE200 Manual De Instrucciones

48
• Take the products and accessories out of the box carefully. Use the contents list to check for any missing parts.
Please verify that all listed articles in the list provided are present.
• Carefully inspect the product to make sure it has not been damaged or broken while being transported.
• Do not dispose of packaging items until you had the chance to carefully inspect the product and it has been
used satisfactorily.
ATTENTION: If any part is missing or damaged, contact the Authorised Service Centre. Do not
use this product without having replaced the missing or damaged part. Using this product with
damaged or missing parts can cause serious injury to the operator.

ASSEMBLY

1. Attach the lower frame brace (B) to the bottom of the frame legs (A), then place each foot (C) on each side
so that the leg fixing holes are aligned with the holes in the frame legs. Secure the parts with 4 M12x30 (D)
screws and M12 (E) nuts. Tighten the screws firmly with the appropriate wrenches.
2. Attach 2 foot brackets (F) to each foot and leg of the frame. On the right leg, place the handle bracket (G)
between the frame leg and the brackets. Secure the parts with 8 M8x20 (H) screws and M8 (I) nuts. Tighten
the screws firmly with the appropriate wrenches.
F
C
A
A
L
L
I
I
E
E
B
B
J
J
K
K
I
H
H I
H
G G H
D
D