Technical Data; Additional Safety Instructions; Residual Risk - Milwaukee M18 CLT Manual Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20

TECHNICAL DATA

CORDLESS LINE TRIMMER
Production code...........................................................................
No-load speed, low speed ...........................................................
No-load speed, high speed..........................................................
Cutting line ø max........................................................................
Cutting capacity max. ..................................................................
Battery voltage.............................................................................
Weight according EPTA-Procedure 01/2003 (9.0 Ah) .................
Noise/vibration information
Measured values determined according
to EN 60335-1 / EN 50636-2-91.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=2dB(A)) .........................
Sound power level (Uncertainty K=2dB(A)) ..............................
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined
according to EN 60335-1 / EN 50636-2-91.
Vibration front handle ...............................................................
Vibration rear handle ................................................................
Uncertainty K= ..........................................................................
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in
EN 60335-1 / EN 50636-2-91 and may be used to compare one tool with another. It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration emission may differ. This may signifi cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
WARNING Read these instructions carefully, be familiar
with the controls and the proper use of the machine. Save
all warnings and instructions for future reference.
LINE TRIMMER SAFETY WARNINGS
Training
Read the instructions carefully. Be familiar with the controls and
the correct use of the machine.
Never allow children, persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge or
people unfamiliar with these instructions to use the machine,
local regulations may restrict the age of the operator.
Keep in mind, that the operator or user is responsible for
accidents or hazards occurring to other people or their property.
Preparation
Before use, always visually inspect the machine for damaged,
missing or misplaced guards or shields.
Never operate the machine while people, especially children, or
pets are nearby.
Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of falling
objects, head protection must be worn.
Hearing protection may restrict the operator's ability to hear
warning sounds, pay particular attention to potential hazards
around and inside the working area.
Wear heavy long trousers, boots, and gloves. Do not wear
loose fi tting clothing, short trousers, jewellery of any kind, or
use with bare feet.
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
22
ENGLISH
M18 CLT
............ 4585 72 01...
.. ...000001-999999
......................... 4600 min
-1
......................... 5800 min
-1
............................ 2,5 mm
........................... 400 mm
............................. 18 V
............................ 5.6 kg
.......................... 74,3 dB (A)
.......................... 94,4 dB (A)
.......................... 4.08 m/s
2
.......................... 1.96 m/s
2
............................ 1,5 m/s
2
Operation
Keep supply and extension cords away from cutting means.
Wear eye protection and stout shoes at all times while
operating the machine.
Avoid using the machine in bad weather conditions especially
when there is a risk of lightning.
Use the machine only in daylight or good artifi cial light.
Never operate the machine with damaged guards or shields or
without guards or shields in place.
Switch on the motor only when the hands and feet are away
from the cutting means.
Always remove the battery
- whenever the machine is left unattended
- before clearing a blockage
- before checking, cleaning or working on the machine;
- after striking a foreign object;
- whenever the machine starts vibrating abnormally.
Take care against injury to feet and hands from the cutting
means.
Always ensure that the ventilation openings are kept clear of
debris.
Avoid using on wet grass.
Do not walk backwards when using the product.
Do not operate the product when there is a risk of lightning.
Do not expose the product to rain or wet conditions. Water
entering an appliance will increase the risk of electric shock.
Keep bystanders, children and pets 15m away from the area of
operation. Stop the product if anyone enters the area.
Keep the cutting attachment below waist level.
Keep hands and feet away from the cutting means at all times
and especially when switching on the motor.
Beware, the cutting elements continue to rotate after the motor
is switched off.
Beware of objects thrown by the cutting means. Clear debris
like small stones, gravel and other foreign objects from the
work area before starting operation. Wires or string may
become entangled with the cutting means.
The small blade fi tted to the lawn guard is designed to trim the
new extended line to the correct length for safe and optimum
performance. It is very sharp, do not touch it particularly when
cleaning the product.
Make sure the cutting head attachment is properly installed and
securely fastened.
Make sure all guards, defl ectors, and handles are properly and
securely attached.
Do not modify the product in any way, this may increase the
risk of injury to yourself or others.
Use only the manufacturer's replacement cutting line. Do not
use any other cutting attachment.
Do not use metallic cutting means
Immediately switch off and remove the battery pack in the
event of accident or breakdown. Don't operate the product
again until it has been fully checked by an authorised service
centre.
Ensure that the cut-off blade is properly positioned and secured
before each use.
Before use and after any impact, check that there are no
damaged parts. A defective switch or any part that is damaged
or worn should be properly repaired or replaced by an
authorised service facility.
Never operate the product unless all guards, defl ectors, and
handles are properly and securely attached.
Consider the environment in which you are working. Keep the
working area free from wires, sticks, stones, and debris which if
struck by the cutter can become thrown objects.
Maintenance and storage
Remove the battery before carrying out maintenance or
cleaning work.
Use only the manufacturer's recommended replacement parts
and accessories (see page 21).
Inspect and maintain the machine regularly. Have the machine
repaired only by an authorized repairer.
When not in use, store the machine out of the reach of children.
Never fi t a metal replacement line.
Stop the product and allow it to cool before storing or
transporting.
Clean all foreign material from the product. Store it in a cool dry
and well-ventilated place that is inaccessible to children. Keep
away from corrosive agents such as garden chemicals and
de-icing salts. Do not store outdoors.
For storage, always remove the battery.
For transportation, secure the product against movement or
falling to prevent injury to persons or damage to the product.

ADDITIONAL SAFETY INSTRUCTIONS

Never allow children, persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge or people unfamiliar with
these instructions to use the machine,
local regulations may restrict the age
of the operator.
Remove the battery pack before
starting any work on the machine.
Do not dispose of used battery packs
in the household refuse or by burning
them. Milwaukee Distributors offer to
retrieve old batteries to protect our
environment.
Do not store the battery pack together
with metal objects (short circuit risk).
Use only System M18 chargers for
charging System M18 battery packs.
Do not use battery packs from other
systems.
Battery acid may leak from damaged
batteries under extreme load or
extreme temperatures. In case of
contact with battery acid wash it off
immediately with soap and water. In
case of eye contact rinse thoroughly
for at least 10 minutes and
immediately seek medical attention.

RESIDUAL RISK

Even when the product is used as
prescribed, it is still impossible to
completely eliminate certain residual
risk factors. The following hazards may
arise in use and the operator should
pay special attention to avoid the
following:
• Injury caused by vibration
Hold the product by designated
handles and restrict working time and
exposure.
• Exposure to noise can cause hearing
injury
ENGLISH
23

Publicidad

Tabla de contenido
loading

Tabla de contenido