Dell PowerEdge T300 Procedimientos Iniciales Con El Sistema página 6

Ocultar thumbs Ver también para PowerEdge T300:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 102
An integrated ATI ES1000 SVGA video controller supporting True-color
graphics in the following resolutions: 640 x 480, 800 x 600, 1024 x 768,
1280 x 1024, and 1600 x 1200.
Systems management circuitry that monitors critical system voltages
and fan speeds. The systems management circuitry works in conjunction
with the systems management software.
Standard baseboard management controller with serial access.
Back-panel connectors include serial, video, four USB connectors,
and two NIC connectors.
Two 5.25-inch drive bays for a DVD-ROM, CDRW/DVD combo,
or tape backup unit.
NOTE:
One 3.5-inch drive bay for floppy drive.
Support for the following internal hard-drive configurations:
Up to four internal, 3.5-inch, SATA hard drives with integrated drive
controllers.
Up to four internal, 3.5-inch, Serial-Attached SCSI (SAS) hard drives
with an optional SAS controller card or backplane.
NOTE:
connected to the optional SAS controller card or backplane. Either option
requires the backplane configuration.
Optional remote access controller (DRAC 5) for remote systems
management. This option requires a dedicated PCI slot (slot #1).
A 490-W power supply. Also available with an optional redundant 528-W
power supply.
For more information about specific features, see "Technical Specifications".
The following software is included with your system:
A System Setup program for quickly viewing and changing system
configuration information. For more information on this program, see
"Using the System Setup Program" in the Hardware Owner's Manual.
Enhanced security features, including a system password and a setup
password, available through the System Setup program.
4
Getting Started With Your System
DVD devices are data only.
Hot-plug capability is supported only when SATA or SAS drives are

Publicidad

Tabla de contenido
loading

Tabla de contenido