Chauvet DJ INTIMIDATOR SCAN LED 200 Guía De Referencia Rápida página 4

Intimidator™ Scan LED 200 QRG
AC Power
Power Linking
Fuse
Replacement
Control Panel
Description
Mounting
Product
Mounting
Diagram
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 11 Intimidator™ Scan LED 200 products at 120 VAC and
21 units at 230 VAC.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
Button Function
<MODE/ESC> Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
Before mounting this product, read the Safety Notes.
Bracket Adjustment Knob
Mounting Bracket
4
EN