Gas Connection; Adjustments; Combustion Head Adjustment; Combustion Air Adjustment - Lamborghini Caloreclima EM 35-E Manual Para La Instalacion Y El Mantenimento

GAS CONNECTION

The system must be equipped with all the accessories required by current regulations. We
recommend the following: always include a filter, do not apply mechanical strain to the com-
ponents and, therefore install a flexible joint as well as a pressure stabilizer and an intercep-
tion cock at the heating system inlet. The pipes must be laid using rigid pipes. Any flexible
pipes must be type approved. Also bear in mind the necessary space required for carrying out
maintenance operations on the burner and the boiler. After fitting the valve unit on the burner,
check that there are no gas leaks during the first ignition stage.

ADJUSTMENTS

COMBUSTION HEAD ADJUSTMENT

- Loosen the knobs (B).
- Acting on these modifies the position of the
draught tube with respect to the combu-
stion head. Lining knobs up with values 1, 2
or 3 gives minimum, medium and maximum
burner delivery respectively.
- Once adjustment has been completed
tighten the knobs (B).

COMBUSTION AIR ADJUSTMENT

(EM 35-E)
The immediately accessible micrometric
screw device provides fine, stable and precise
adjustment of delivery air. After loosening the
nut rotate the screw clockwise to restrict the
throttle opening or anticlockwise to widen it:
refer to the information plate.
UK
40
M
M