Preserving The Top Cover And The Front Frame; Cleaning Mesh Filter; Cleaning The Dispensers - Samsung WA52M8650A Serie Manual De Instrucciones

Preserving the top cover and the front frame

Do not place any heavy or sharp objects or
a detergent box on the washer. They can
scratch or damage the top cover of the unit.

Cleaning mesh filter

Clean the mesh filter of the water hose once or twice a year.
NOTE
If the mesh filter is clogged, the "4C" information code appears on the the washer's display screen.

Cleaning the dispensers

WA8600M_WA52M8650A_DC68-03774C_EN.indd 47
NOTE
Since the entire washer has a high-gloss
finish, the surface can be scratched or
damaged.
Avoid scratching or damaging the surface
when using the washer.
1. Turn off the washer, and then unplug the
power cord.
2. Close the faucet.
3. Loosen and disconnect the water hose
from the back of the washer. Cover the
hose with a cloth to prevent water from
gushing out.
4. Use pliers to pull out the mesh filter
from the inlet valve.
5. Submerge the mesh filter deeply in
water so that the threaded connector is
also submerged.
6. Dry the mesh filter completely in a
shaded area.
7. Reinsert the mesh filter into the inlet
valve, and reconnect the water hose to
the inlet valve.
8. Open the faucet.
The automatic dispenser may need to be
cleaned periodically due to laundry additive
buildup.
1. Pull the dispenser drawer straight back
until it stops.
English 47
2016-12-23 2:55:27