Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
/
GB
DE
US
Table of Contents
1 Introduction
2 Manufacturer's Details
3 EC Declaration of Conformity
4 Warranty
5 Rating Plate
1 Introduction
• These instructions have been created for the Positioner type EP50 . They provide information on how the product is
to be installed by specialized personnel trained or authorized by the manufacturer, and how it must be operated by
your staff after they have been properly instructed in its handling .
• Be sure to read these Original Instructions for Use carefully before putting the Positioner into service, making sure
that the information provided herein has been well understood and will be strictly observed in handling the product .
• Only the original version in the German language shall be legally binding exclusively.
Subject to change without notice .
2 Manufacturer's Details
Carl Stahl Kromer GmbH
Nägelseestraße 37
D-79288 Gottenheim
3 EC Declaration of Conformity
We declare with sole responsibility that this product has been developed, designed and manufactured in compliance
with the applicable EC Directive 2006/42/EC on machinery .
The following standards have been observed: DIN EN 12100
Documentation Officer: Carl Stahl Kromer GmbH, tel .: +49 (0) 7665 50 207-0
This EC Declaration of Conformity shall become invalid if the Positioner is rebuilt or modified in any way .
Thomas Steinle
Thomas Steinle
Managing director
4 Warranty
We warrant the functionality of this product and the flawlessness of its materials for a period of 24 months, starting on
the date of delivery. However, this warranty excludes the consequences of normal wear and tear, overload, improper
use and use of third-party spare parts .
Claims under this warranty can only be accepted if the product has been handed over to us in undismantled condition .
Any damage caused by defective materials or manufacturing defects will be remedied free of charge by way of
replacement or repair . Our Standard Terms and Conditions shall apply .
5 Rating plate
• The rating plate is attached to the housing .
• It provides you with information regarding type and permissible load range .
• The rating plate also includes the CE marking .
12
12
12
12
12
12
13
13
13
Tel .:
+49 (0) 7665/50 207-0
Fax
+49 (0) 7665/50 207-22
Gottenheim,
20 . 03 . 2019
Operating Instructions - Positioner
Betriebsanleitung - Positionierer
E-mail: info@easy-balancer .com
Website: www .easy-balancer .com
Bernd Lienhard
Head of Quality Assurance
13
14
14
14
14
15
15
15
B. Lhd
Publicidad
Capítulos
Tabla de contenido
