Operating The Positioner; Maintenance & Inspections; Disposal - Easy Balancer EP50 Serie Instrucciones De Uso

Operating Instructions – Positioner

12 Operating the Positioner

• To lower the working load, pull it down by hand until you reach the desired position .
• To raise the working load, lift it by hand until you reach the desired position .
13 Maintenance & Inspections
• I f the Positioner is found to be damaged in any way, stop working with it at once, mark
ATTENTION!
!
it as defective and inform your superior or the responsible person .
• K eep the lateral opening (used for braking force adjustments) closed at all times to
prevent any ingress of dirt or grease!
Daily inspections for damage are required for:
• Polyamide cable
• Safety suspension
Q
• Anti-crash safety device
• Brake adjusting screw
The Positioner, especially its cable, must be periodically – but at least once every year – checked for damage by a
competent person . If the device is found to be defective in any way, it must be withdrawn from service at once .

14 Disposal

• W hen disposing of the product, be sure to observe all the directives and regulations in
force at the time regarding the handling of metals, plastics, electrical and electronic com-
ponents, greases, oils, etc .
• S hould the product need to be disassembled, such work may only be performed by specia-
lized personnel trained and instructed by the manufacturer .
W
E
/
GB US
Q
W
E
15