Adjusting the Projected Image
Raising the Projector Height
Press the elevator button.
1
Raise the projector to the desired display angle, and then release the button to
2
lock the elevator foot into position.
Use the tilt adjustment wheel to fine-tune the display angle; if necessary, press the
3
side elevator buttons to raise the rear side of the projector to the desired display
angle.
Lowering the Projector Height
Press the elevator button.
1
Lower the projector, and then release the button to lock the elevator foot into
2
position.
Elevator button
1
Elevator foot
2
Tilt adjustment wheel
3
12
Using Your Projector
1
2
3