Technical Data
Engine size / rate power
Maximum Motor Performance
Engine max speed at full throttle
Idle Vibration
Vibration when Running
Spool Maximum Speed
Acoustic Pressure
Acoustic Power Level
Fuel Specifications
• The tool has an air-cooled 2-cycle motor using a mix of unleaded gasoline and high quality self-propulsion oil with fuel
stabilizer specified for air-cooled two-cycle motors.
• The motor is certified to run with unleaded gasoline for vehicles with 87 or more ([R+M]/2) octane level.
• Do not use gasoline premixed with oil gasoline, as the used for motorcycles bought in service stations.
• Do not use automotive oil or oil for 2-cycle outboard motors oil.
• The mix ratio should be 32 parts gasoline per 1 part oil (32:1 ratio). Prepare the mix in a gasoline-approved container.
Always mix thoroughly before pouring in the motor tank.
Do not use fuel mix stored longer than 7 days. Make small amounts of mix.
CAUTION
Never smoke near fuel, the gasoline filling up area or where the oil mix is being prepared or when
WARNING
operating the tool.
Any attempt to start the tool without adding oil to the fuel mix will cause damage to the tool.
WARNING
Use the ACT-2T-4 or ACT- 2T-16
per each liter gasoline.
1
L
1 liter
Gasoline
To prolong the useful life of the motor use
* 1 gallon = 3,78 liter
Code
Description
Net Weight
Fuel Tank
Idle Speed
100 dBA (L pA ) (in compliance with ISO 11806 1997, ISO 7917:1987 Standards)
113 dBA (L WA ) (in compliance with ISO 10884 Standard)
Work cycle
A wrong mix may cause the motor to throw a rod causing
expensive repairs!
+
6 capfuls oil
** Not included
DES-25R
16029
Gas string trimmer
157 Oz (163 Oz with fuel and thread spool)
435 cc
25 cc | 0,8 Hp
1 Hp (complying with ISO 8893 Standard)
10 500 rpm
3100 rpm - 4 300 rpm
15,7 ft/s
(Both Handles)
2
42,6 ft/s
(Auxiliary Handle), 27,5 ft/s
2
12 000 rpm
30 min rest per each emaciated tank.
6 hours daily.
OILS** cap as measure, mix 6 capfuls oil
=
two-cycle synthetic motor oil.
(Control Handle)
2
ratio
32:1
Mix
ENGLISH
3