Motor Tools Safety Standards - Truper DES-25R Manual De Instrucciones

Keep your work area clean, tidy and well illuminated.
CAUTION
Cluttered and dark areas can cause accidents.
Never use the tools in explosive environments or in
presence of flammable liquids.
DANGER
Set the tool at least 9 meters (30 feet) away from the
fill up area before starting the motor.
Keep children and other people at a safe distance while
using the tool.
WARNING
Distractions could make you loose control and
cause accidents.
Avoid making contact with power lines or power circuits.
DANGER
Place and avoid all power lines and circuits especially
hidden cables and any other grounded object.
Stay alert, be cautious and use common sense.
CAUTION
Do not let being used with the tool operation distract
you while using it. It could cause accidents.
Do not use the tool if tired or under the influence of
drugs, alcohol or prescription medicine.
DANGER A moment of distraction while using the tool could
cause severe personal injury.
Use the tool with the guards and protectors in place
and in good conditions.
WARNING
Failure to comply with this warning exposes you to
severe personal injury.
Secure and support the work piece adequately.
CAUTION Use clamps and stable work surface.
Never force the tool.
CAUTION
Working within its range assures a better and safer
performance.
Keep the tool in a safe place away from the reach of
children.
WARNING
Power tools are dangerous in inexperienced hands.
Wear the right clothes.
WARNING
Loose clothes, jewelry or long hair may get
caught in the moving parts.
Keep your hands away from rotating and / or mobile
parts.
WARNING
Failure to comply with this warning exposes you to
severe personal injury.
Do not use the tool in closed areas.
DANGER To avoid breathing carbon monoxide vapors,
an odorless toxic gas potentially mortal.
4 ENGLISH
Motor Tools
Safety Standards
Use the right personal protection equipment.
CAUTION
Use eye protection. Dust-masks. Anti-skid safety shoes.
Helmet. Hearing protection. In the right conditions they
considerably reduce the risk of injury.
Turn off the machine before adjusting, changing
accessories or storing.
WARNING
Verify the tool switch is in the OFF position before
plugging or moving it.
Never use the tool if the switch is not working or not
correctly assembled.
WARNING
Failure to comply with this warning exposes
you to severe injury. Repair immediately in
a
Do not overreach.
CAUTION Good footing and balance give better control on the
tool in unexpected situations.
Avoid to accidentally turning on the tool.
WARNING
Verify the tool motor is off before leaving it
or servicing.
Remove all brackets before turning on the machine.
DANGER Additional tools or wrenches placed in a rotating part
in the tool could cause severe personal injury.
Service the tool and verify it is in the best working
conditions before using it.
CAUTION
Carefully check the mobile parts, their alignment
and assembly. Make it periodically. Look for any
damaged element or piece that is not working
adequately. Repair immediately in a
Authorized Service Center.
Accessories.
CAUTION Use only accessories or spare parts indicated in this
manual or certified by
Never leave the tool running unattended.
DANGER
To avoid severe accidents turn off and disconnect
the tool after using.
Do not smoke near fuel.
Do not smoke near the filling up area or when
DANGER
operating the tool.
Authorized Service Center.
.