Mosa GE 7000 Manual De Instrucciones página 53

© MOSA 1.0-06/99
Before stopping the engine it is compulsory to
effect the following operations:
- stop to draw three/single-phase current from the
auxiliary sockets.
- stop to draw power from the welding sockets
(only for TS models).
ENGINES WITH ELECTRIC START
Make sure that the machine is not under load.
Wait for a few minutes to allow the engine to cool
down, anyway follow the instructions contained in
the engine manual.
Shut the gasoline cock.
OFF Take out the key (Q1), turning it counter
ON
clockwise (when assembled)
START
pressing the stop button (32) until the
engine stops.
NB.: for safety reason the key must be kept
by qualified personel.
ENGINES WITHOUT ELECTRIC START
Make sure that the machine is not under load.
Wait for a few mìnutes to allow the engine to cool
down, take however into consideration the
prescriptions given in the engine use manual.
Shut the gasoline cock.
Set the engine switch (32) to the OFF position.
STOPPING THE ENGINE (GASOLINE ENGINE) GE_, MS_, TS_
or
M
27