Beissbarth BAC 4100a Instrucciones Originales página 18

Operating Instructions — Recover
Recover Refrigerant from a Vehicle continued
5. Press OK. The machine begins the recovery
process. The clicking noise indicates the solenoid is
opening and closing — this is normal.
6. The machine runs a self-clearing cycle to clear any
internal refrigerant from its internal plumbing.
7. When the system has recovered to 0 psi, the
vacuum pump starts and runs until recovery is
complete.
8. The machine displays
CHECK OIL BOTTLE
PRESS OK TO CONFIRM
Press OK to start the oil drain—this may require up
to 90 seconds to complete.
9. After the oil drain is complete, a summary is
displayed of gas recovered and oil drained . At
this point you may print out recovery information
and pre-recover diagnostics by selecting OK . The
displayed recovered weight can vary depending on
ambient conditions and should not be used as an
indicator of scale accuracy.
10. The amount of oil that was removed from the A/C
system is the amount of new oil that can be charged
into the A/C system after evacuation is complete.
Use only new oil to replace the oil removed during
•
the recycling process.
• Dispose of used oil according to government
regulations.
Recovery is complete.
16