Programmed Playback; Programmed Playback With Audio Cd And Mp3/Wma Disc; Programmed Playback With Video Cd; Repeat Programmed Tracks - Magnavox MDV560VR Guia Del Usuario

Programmed Playback

Programmed Playback with Audio CD
and MP3/WMA Disc
The Program function enables you to store your favorite
tracks from any disc in the player memory.
Program can contain 30 tracks.
1 1
Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
E
The mark will appear to the right of the word Program on
the right side of the menu screen.
Note
Press PROGRAM to exit the Program Edit mode;
the E mark will disappear.
2 2
Select a track, then press OK to place the select-
ed track on the Program list.
3 3
Repeat step 2 to place additional tracks on the
Program list.
Program
CD E
TRACK 1 TRACK 12
TRACK 2 TRACK 8
TRACK 3 TRACK 10
TRACK 4 TRACK 3
TRACK 5
TRACK 6
TRACK 7
Clear All
TRACK 8
0: 56: 18 STER. NORM.
Audio CD menu
4 4
Press B.
The programmed track you selected last is highlighted on the
program list.
5 5
Press v/V to select the track you want to start
playing.
Press TITLE to move to the next page.
Press DISC MENU to move to the previous page.
6 6
Press PLAY (N) to start.
Playback begins in the order in which you programmed the
tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks on the Program list have
played once.
7 7
To resume normal playback from pro-
grammed playback, press PROGRAM.
Select a track from CD (or MP3/WMA) list
and then press OK.
"PROG" indicator disappears in the display window.
Note
The programmed tracks/files are cleared when the power is
turned off or the disc is removed.
Program
MP3 WMA E
TRACK 8.mp3
TRACK 1.mp3
TRACK 2.mp3
TRACK 2.mp3
TRACK 4.mp3
TRACK 3.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
Clear All
TRACK 8.mp3
00:00 OFF
3
MP3/WMA menu

Programmed Playback with Video CD

Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function (see page 19).
1 1
Insert Video CD and close the tray.
2 2
Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
VCD
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
Note
Press RETURN or PROGRAM to exit the Program menu.
3 3
Follow steps 2-6 of "Programmed Playback with
Audio CD and MP3/WMA disc" (see section on
left).
4 4
To resume normal playback from
programmed playback, press PROGRAM.
"PROG" indicator disappears in the display window.

Repeat Programmed Tracks

" " To repeat the track currently playing, press REPEAT.
The Repeat icon and "TRACK" appears on the menu screen.
" " To repeat all tracks on the program list, press REPEAT a
second time.
The Repeat icon and "ALL" appears on the menu screen.
" "
To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.

Erasing a Track from Program List

1 Press PROGRAM during playback (Audio CD and
MP3/WMA disc only) or in the stop mode to enter the
Program Edit mode.
The E mark will appear.
2 Press B to move to the Program list.
3 Use v/V to select the track that you wish to erase from
the Program list.
4 Press CLEAR.
The track will be erased from the Program list.

Erasing the Complete Program List

1 Follow steps 1-2 of "Erasing a Track from Program List"
as above.
2 Use v/V to select "Clear All", then press OK.
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
Operation 33
Program
E
Clear All