Precautions; Notes On Discs; About Symbols; Selecting The Viewing Source - Magnavox MDV560VR Guia Del Usuario

6 General Information

Precautions

Handling the unit
When shipping the unit
The original shipping carton and packing materials come in
handy. For maximum protection, re-pack the unit as it was
originally packaged at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio may
be distorted during playback. In this case, position the unit
away from the TV, VCR, or radio, or turn off the unit after
removing the disc.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray, near
the unit. Do not leave rubber or plastic products in contact
with the unit for a long period of time. They will leave marks
on the surface.
Cleaning the unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty, use
a soft cloth lightly moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine, or thin-
ner, as these might damage the surface of the unit.
To obtain a clear picture
The DVD+VCR is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the pic-
ture quality will be poor.
Regular inspection and maintenance are recommended after
every 1,000 hours of use. (This depends on the operating
environment.)
For details, please contact your nearest dealer.

Notes on Discs

Handling discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get
on the surface.
Do not stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of heat,
or leave it in a parked car exposed to direct sunlight, as
there may be a considerable temperature increase inside the
car.
Cleaning discs
Fingerprints and dust on the disc can cause poor picture
quality and sound distortion. Before playing, clean the disc
with a clean cloth. Wipe the disc from the center out.
Yes
Do not use strong solvents such as alcohol, benzine, thinner,
commercially available cleaners, or anti-static spray intended
for older vinyl records.

About Symbols

About the symbol display
" " may appear on the TV screen during operation. This
icon means the function explained in this owner's manual is
not available on that specific DVD video disc.
About the disc symbols for instructions
A section whose title has one of the following symbols are
applicable only to those discs represented by the symbol.
DVDs
DVD
VCD2.0 Video CDs with the PBC (playback control) func-
tion.
VCD1.1 Video CDs without the PBC (playback control)
function.
CD Audio CDs.
MP3 MP3 Discs.
WMA Discs.
WMA
JPEG Discs.
JPEG

Selecting the Viewing Source

You must select one of your output sources (DVD or
VCR) to view on the TV screen.
• If you want to view DVD deck output source:
Press DVD on the remote or DVD/VCR on the front panel. DVD
indicator in the display window lights and output source of DVD
deck is viewed on the TV screen.
• If you want to view VCR deck output source:
Press VCR on the remote or DVD/VCR on the front panel. VCR
indicator in the display window lights and output source of VCR
deck is viewed on the TV screen.
Notes
If you insert a disc while the DVD+VCR is in the VCR
•
mode, the DVD+VCR will switch to DVD mode
automatically.
If you insert a cassette tape without prevention tab while
•
the DVD+VCR is in the DVD mode, the DVD+VCR will
switch to VCR mode automatically.
No