Treatment With Homelight - BaByliss G960E Manual De Instrucciones

If you do not experience any abnormal reactions or discomfort
(FIG. 11) 48 hours after the test, you may start treatment and move
onto the chapter "Treatment with Homelight®".
If your skin does not react correctly to the test (FIG. 12), if you
experience any abnormal reactions or discomfort after 48 hours,
perform a second test at intensity level 1, whatever your phototype,
without considering the Skin Sensor, and wait 48 hours.
(FIG. 13-14-15)
- If you react correctly to this second test, proceed with the first
treatment session, manually selecting level 1.
- If your skin does not react correctly to this second test, we
recommend not using the appliance.
For subsequent sessions, if there is absolutely no discomfort or side
effects, you may gradually increase the power level over the sessions,
in respect of the table below and using the intensity choice log to help
you;
- Phototype I:
- Phototype II:
- Phototype III:
- Phototype IV:
- Phototype V:
3.3. Treatment with Homelight®
We recommend that you always use the Skin Sensor on your skin
before each depilation session and each change to the treatment
area.
1. Plug the adapter cord into the socket on the Homelight® device
(which is located on its handle) (FIG. 1).
46