Airwell RWV05 Manual De Operación E Instalación página 12

Operation
Clock Function
(1) 24-hour system is used, and at first time of powering on, it will display default 12:00.
(2) When first powering on wired controller, will be displayed on the wired controller interface,
clock time can be adjusted within 10s. At the same time, clock icon and minute-place of time will
flash, meaning the current time can be adjusted.
(3) Press Time key for 5s to enter clock setting function. It will show after first powering on
(if not first time of powering on, clock time is the memorized time), with clock icon and minute-place
flashing, meaning current time can be adjusted.
(4) Press Time key to shift the hour place and the minute place. After adjustment the time, press set
key to confirm.
(5) In the process of time adjustment, if there is no operation for 10s, it will quit and restore previous
state.
(6) In the process of time adjustment, press ON/OFF key to quit clock setting function and execute
turning on/off operation at the same time.
(7) When setting timer or sleeping function, clock time cannot be adjusted. If press Time key for 5s to
enter clock adjustment, clock icon and clock time will flash indicating time cannot be adjusted.
9