Airwell RWV05 Manual De Operación E Instalación página 14

Operation
Timer Setting Cancellation
(1) If there is no Time key related operation for 10s, this setting will be cancelled and the timer will
come back to the previous state.
(2) Press Time key, until the timer icon disappear, the timer function will cancel.
(3) Relation to other buttons when timer is set.
Press the key or key to exit the current setting, press them again to operate the function
accordingly; Press the (ON/OFF) key can exit the timer setting and power ON/OFF directly. If there
is a timer before, the wired controller will operate by following the previous setting. If not, the wired
controller will have no timer operation.
Swing
(1) If Sw5 is on, only the Up/Down swing will be involved in function circulation. At this time SW7 is
invalid.
(2) If Sw5 is off, swing type can be set by Sw7, when Sw7 is off, only Up/Down swing valid, when Sw7
turns on, Up/Down and Left/ Right swing valid. Only Up/Down swing is default.
① If Sw7 is off (default): only Up/Down swing is available.
Press SET key to enter function circulation, Up/Down swing icon flashing, then press SET key again
to confirm with swing icon statically displaying. If swing function is set, execute the above operation to
cancel.
② If Sw7 is on: Up/Down swing and Left/Right swing are available.
Press SET key to enter function circulation, Left/Right swing icon flashing, then press Up/Down key
to enter Up/Down swing, with Up/Down swing icon flashing. Press SET key again when swing icon
flashing to confirm, with swing icon statically display. If swing function is set, execute the above
operation to cancel.
③ If connecting to the salve wired controller, Sw7 dip code of master and slave wired controllers
should be set the same and should match the actual wired controller unit.
11