Airwell RWV05 Manual De Operación E Instalación página 22

Operation
Parameter Inquiry
(1) Keep pressing
enter parameter inquiry. Unit No. is displayed on 88 area of clock while data type is displayed on 88
area of timer. Unit No. is displayed on the first two "88" fields of clock while data type is displayed
on the first two "88" fields of timer. The data type includes A, b, C, d, E and F. The current data is
displayed behind date type. For example, ambient temp. of 00 unit is 16 degree, then "00 A 16" is
displayed. Press to choose different type of data from A, b, C, d, E and F.
Data Type meaning
A Indoor sensor Tai temp.
b Indoor sensor Tc1 temp.
C Indoor sensor Tc2 temp.
d Indoor unit PMV opening/2
E Indoor unit address
F Indoor unit central address
(2) In parameter inquiry state, press
19
for 5 seconds (if it is the four-way cassette model, the time is 10 seconds) to
key to change the unit No. address in the group.
System
Actual value, decimal sys.
Actual value, decimal sys.
Actual value, decimal sys.
Actual value, decimal sys.
Actual value, hexadecimal sys.
Actual value, hexadecimal sys.