Refco REF-CLASS-GAUGE Guía De Instalación Y Funcionamiento página 12

Installation and operating guide
Alarm
With this setting, a pressure range can be defined. The alarm flashes if values
outside this range are measured.
Level
The REF-CLASS GAUGE can calculate the fill level from the pressure and density
of the medium. In the level menu, the density of the medium can be defined. To
display the fill level, switch to the units menu and select the desired unit of length for
the fill level.
Switch-off time
The duration until automatic shut-off can be set in four predefined intervals ("5 min",
"15 min", "30 min" or "OFF"). If "OFF" is set, the device remains active until it is
switched off by the ON/OFF button or the battery is empty.
If a time is set, the REF-CLASS GAUGE runs for this time after the last operation
and then switches off automatically.
10
English