Descargar Imprimir esta página

TAG Heuer SBF8A Manual Del Usuario página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

TABLE OF CONTENTS
PART I
SAFETY INSTRUCTIONS
PART II
LEGAL INFORMATION
Caution! Before you begin to use the TAG Heuer Connected
Watch, please read the following instructions containing im-
portant safety and regulatory information. Also, read your quick
start guide and warranty provided with your product.
PART I: SAFETY INSTRUCTIONS
A. Main characteristics of your TAG Heuer Connected Watch
The TAG Heuer Connected Watch includes Wi-Fi, Bluetooth, global
positioning system (GPS) and near field communications (NFC)
functions. Ambient light sensor and inter-modularity (i.e. users can
change parts of the Watch case such as its "lugs" by means of buying
extra accessories) are also available in this product.
It is not intended to be used as a medical device nor as a fitness
tracker. It requires a phone running Android 4.3+ or iOS 8.2+. Visit
g.co/wearcheck on your phone or a computer to see if it is compatible.
The TAG Heuer Connected Watch requires the use of the charging
accessories provided with it.
Use only those accessories approved by TAG Heuer. Using any ac-
cessories not approved by TAG Heuer for use with your TAG Heuer
Connected Watch might invalidate any approval or warranty appli-
cable to your device and or might result in the TAG Heuer Connected
Watch becoming inoperative and dangerous.
You can disable the watch Bluetooth, Wi-Fi, GPS, NFC functions
by following the stages below:
WIFI OR BLUETOOTH
If your screen is dim, touch the screen to wake up the watch;
• Swipe down from the top of the screen;
• Find the Settings
, then touch it;
• Go to "Connectivity ", Touch Wi-Fi or Bluetooth settings depend-
ing on which you want to turn off;
• If Wi-Fi or Bluetooth is set to Automatic, touch the little icon listed
next to either Wi-Fi or Bluetooth to turn it off or disable.
SPECIFIC USER'S GUIDE - SAFETY & LEGAL INFORMATION
TAG HEUER CONNECTED MODULAR - MODEL SBF8A
Page
GPS
• Press the crown
2
• Scroll to and tap Settings
7
• Scroll to and tap Connectivity
• Tap the toggle switch to turn on or off
NFC
• Press the crown
• Scroll to and tap Settings
• Scroll to and tap Connectivity
• Scroll to and tap NFC
• Tap the toggle switch to turn on or off
B. Important safety precautions
Please note that failure to comply with the following guidelines may
cause malfunctions or be hazardous to the user and/or exclude or
reduce the benefit from the warranty.
1. Using the TAG Heuer Connected Watch and its accessories
safely
a. Keeping your TAG Heuer Connected Watch safe
(i) General
Do not use or store the TAG Heuer Connected Watch in dusty, dirty
areas as its components may be damaged.
Do not store the TAG Heuer Connected Watch in warm areas. High
temperatures can shorten the life of electronic devices, damage
batteries and warp or melt certain plastics.
Do not store the TAG Heuer Connected Watch in cold areas. When
the TAG Heuer Connected Watch afterwards warms up to its normal
temperature, moisture can form inside the TAG Heuer Connected
Watch, which may damage the electronic circuits.
Do not attempt to open the watch's casing. Non-expert handling of
the TAG Heuer Connected Watch may cause damages to your TAG
Heuer Connected Watch and will void the warranty.
Do not drop or knock the TAG Heuer Connected Watch. Do not place
heavy objects on it.
Do not use sharp objects on the screen. Do not use excessive force
on the screen. Rough handling may damage the internal circuits.
Do not use harsh chemicals, cleaning solvents or strong detergents
to clean the TAG Heuer Connected Watch.
While listening to your device with wireless headphones, make

Publicidad

loading