Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Probe

WARNING
Consuming undercooked food can result in foodborne illness. Use probe according to
the following instructions to ensure all portions of the food reach minimum safe cooking temperatures.
Recommendations for minimum safe food temperatures can be found at foodsafety.gov or IsItDoneYet.gov.
Internal food temperature is frequently used as an indicator of doneness, especially for roasts and
poultry. The Probe mode monitors the internal food temperature and turns the oven off when the internal
food temperature reaches the programmed temperature.
Always check the temperature at multiple locations in the food with a food thermometer after cooking to
ensure that all portions of the food have reached the minimum safe internal temperature for that food.
Proper Probe Placement
After preparing the meat and placing it on the cooking
pan follow these instructions for proper probe placement.
probe will rest in the center of the thickest part of
the food. For best performance the probe should
be fully inserted into the food. If the probe is not
located properly, it may not accurately measure the
temperature of the coolest portion of the food. Some
foods, particularly small items, are not well suited for
cooking with the probe due to their shape or size.
part of the breast.
of the roast.
center of the lowest large muscle or joint.
probe into the center of the dish.
the meatiest area, parallel to the backbone.
Probe Usage
To use the probe without preheating:
2. Place the food in the oven and connect the probe into
the probe outlet in the oven.
3. Program the desired probe and cooking mode settings
by selecting More, then Probe, then choosing the
desired cooking mode. Next, choose the desired
cooking temperature and select Next. Finally, select
the desired internal food temperature and press Start.
49-2000636 Rev. 1
To use the probe with preheating:
Convection Bake, or Convection Roast) and select
the desired cooking temperature.
3. Once the oven is preheated, place the food in the
oven and connect the probe to the probe outlet,
walls and probe outlet are hot.
4. Program the probe temperature by selecting More,
then Probe, then entering the desired internal food
temperature. The maximum internal food temperature
that you can set is 200° F.
Probe Care Guidelines
product may result in damage to the probe input jack.
and removing them from the meat and outlet
pull on the cable when removing it.
completely defrosted before inserting the probe.
from the outlet until the oven has cooled.
steam clean cycle.
Bake,
17

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido