Scan function
Using this function, you can play the first 10 seconds of each chapter (DVD) or track (CD or
VCD) on the disc.
1
During playback, press PLAY MODE repeatedly until '
appears on the screen.
2
After 10 seconds, the DVD Recorder will switch to the next
chapter/track. To resume the playback at the corresponding
chapter/track, press STOP h and then PLAY G .
Camera angle
If a disc contains video sequences that were recorded with different camera angles, you can
select different angles for playback.
1
During playback, press PAUSE 9 . You will see a still picture.
2
Press the SYSTEM-MENU button and select '
a The '
F
' icon cannot be selected.
b The selected scene was only recorded with one camera angle. This
function is, therefore, not available. For more information, please read
the label of your DVD disc.
3
Select the desired angle with CH- B or CH+ A . You can also
directly enter the number with the number buttons 0..9 .
4
After a short pause, playback will resume from the new angle.
The '
F
' icon will remain visible until a section starts that only
has one camera angle.
Other playback functions
6
'
' using C .
F
Problem
43