Subzero UC-24CI Manual Del Usuario página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

T R O U B LE S HO O T I NG
Troubleshooting
IC E P R O DUCT I O N ( M O D E L U C - 2 4 C I )
No ice.
Verify the ice maker has been on for at least 24 hours.
Verify the freezer temperature is near 0°F.
Verify the ice container is properly installed.
Verify the ice maker arm is in the down position.
Verify water is being supplied to the unit.
Blue or green ice.
Possible copper supply line corrosion. Contact a
plumber to clean or replace.
Black flecks in the cubes.
Stop use and contact Sub-Zero Factory Certified
Service.
Bad taste.
Defrost the freezer and clean with soap and water.
Place coffee grounds or charcoal briquettes in the
freezer to absorb odor.
Hollow cubes.
Clean the condenser. Contact Sub-Zero Factory Certified
Service if unresolved.
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &
Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United States and other countries.
SERVIC E
Maintain the quality built into your product by contacting
Sub-Zero Factory Certified Service. For the name of the
nearest Sub-Zero Factory Certified Service, check the
Support and Service section of our website, subzero.com
or call Sub-Zero Customer Care at 800-222-7820.
When contacting service, you will need the model and
serial number of your unit. Both numbers are listed on
the product rating plate. Refer to page 4 for rating plate
location.
For warranty purposes, you will also need the date
of installation and name of your authorized Sub-Zero
dealer. This information should be recorded on page 3.
|
subzero.com
9

Publicidad

Tabla de contenido
loading

Tabla de contenido