Technical Data - Hotpoint Ariston MC1LH Instrucciones De Uso

Preliminaries

Technical data

- Minimum working pressure 0,5 bar
- Maximum working pressure 5 bar
- Recommended working pressure 3 bar (in case of
water pressure higher than 5 bar it is recommended
to install pressure reducers)
Before installation and setting to work
Attention! The feeding pipes have to be rinsed
thoroughly before the installation of the mixer, so
that no shavings, welding or hemp residual or other
dirt can be found in the pipes. Foreign bodies can
enter the mixer through the rinsed pipes or the
general water plant and could damage the washers/
ring washers. In order to guarantee a long use of the
product, install the angle valve equipped with filter
and clean them regularly.
Before the setting to work, unscrew the aerator and
rinse it very well.
Warnings
! you should not install the product in presence of
water pressure higher than 5 bar, (in case of higher
pressure, it is advisable to use a pressure reducer);
! water temperature should not be higher than 70°C;
! do not connect the earthing of an electric installation
to a flexible hose or to another water pipeline;
! close the plant in case of an extended absence of
more than twenty-four hours.
EN
13