Hotpoint Ariston MC1LH Instrucciones De Uso página 14

Preliminaries
- Respecting this indications, will mantain the warranty
rights, ensures the declared properties of the products
EN
and warrant the complete reliability.
2 x Ø
NO!
Ø
14
- Before assembling the hose,
please check the appropriate
!
OK
crimping of both sides of the
OK!
hoses.
- Don't tighten by tools.
!
OK
OK!
- Hand-tighten O-ring seal
connectors until feeling a
mechanical rest.
- Don't set the hose in the wall.
Ø
Ø
- Tighten the hose without any
twis or tension.
2 x Ø
- Prolonged contact wit any
substance, even scarcely
aggressive, can cause
external braid damage and
subsquent flexible burst.
Ø
- Before bending the hose
2 x Ø
please consider a straight
part of 2 times the external
diameter.
- Mantain minimum bend
radius (DN= nominal internal
Ø
diameter):
DN6 = 25mm
DN8 = 30mm
DN10 = 35mm
DN13 = 45mm
- Hand-tighten connectors with
gasket seal (nuts) as more as
possible, then apply 1/4 turn
using an appropriate wrench.
!
OK
OK!
- Do not expose the hose to
lateral stress nor overtight
by any tool. (Ex.: during the
installation of the faucet stud
or the drain pop-up lever.
NO!
Ø