Ec Declaration Of Conformity - AEG BEWS18-115BLPX Manual Del Usuario

RESTART CUTOUT
A zero-voltage switch prevents the machine from restarting after a
power cut (Battery change).
When resuming work, switch the machine o and then switch it
back on again.
SMOOTH START
Electronic smooth start for save use prevents jerky run-up of the
machine.
MAINTENANCE
Remove the battery pack before starting any work on the
appliance.
The ventilation slots of the machine must be kept clear at all times.
Use only AEG accessories and spare parts. Should components
need to be replaced which have not been described, please contact
one of our AEG service agents (see our list of guarantee/service
addresses).
If needed, an exploded view of the tool can be ordered. Please state
the Article No. as well as the machine type printed on the label
and order the drawing at your local service agents or directly at:
Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnen-
den, Germany.

EC DECLARATION OF CONFORMITY

We declare under our sole responsibility that the product described
under "Technical Data" ful lls all the relevant provisions of the
directives
2011/65/EU (RoHS)
2006/42/EC
2014/30/EU
and the following harmonized standards have been used.
EN 60745-1:2009 + A11:2010
EN 60745-2-3:2011 + A2:2013 + A11:2014 + A12:2014 +A13:2015
EN 55014-1:2017
EN 55014-2:2015
EN 50581:2012
Winnenden, 2018-08-16
Alexander Krug / Managing Director
Authorized to compile the technical le
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
SYMBOLS
CAUTION! WARNING! DANGER!
Please read the instructions carefully before starting the
machine.
Always wear goggles when using the machine.
Wear gloves!
Remove the battery pack before starting any work on the
appliance.
ANTI Vibration System
Do not use force.
Only for cutting work.
Only for grinding.
Don't press the spindle lock button during start and
during running o .
, 1si �
Accessory - Not included in standard equipment, availa-
�
100
ble as an accessory.
f
Spare Part - Not included in standard equipment,
available as a spare part.
140
Do not dispose electric tools, batteries/rechargeable
1200
batteries together with household waste material.
�
�
Electric tools and batteries that have reached the end of
their life must be collected separately and returned to an
environmentally compatible recycling facility. Check with
your local authority or retailer for recycling advice and
collection point.
Direct Current
V
Voltage
n
Rated speed
European Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
GB
English
23