Lighting Features; Water Temperature - Monogram ZDT915 Serie Manual De Instrucciones

Interior Lights
Lighting
Features
The interior LED lights provide better visibility
for loading and unloading. Do not look directly
into the LED lights. They turn on when the
door is opened and turn off when the door is
closed. The lights will turn off after 15 minutes if
the door remains open. To turn the lights back
on, close and open the door.
The entering water must be at least 120°F
Water
(49°C) and not more than 150°F (66°C), for
Temperature
effective cleaning and to prevent dish damage.
GE Appliances recommends the following
Recommended
products for use in its dishwashers:
Dishwasher
Products • For your manual detergent dispenser, Finish
Quantum
Powders, liquids, and gels may also be used
but may not work as effectively.
10
® Powerball ® is recommended.
Using the Dishwasher
Dishwasher
Do not attempt to replace the lights. If light
replacement is necessary, please contact the
GE Appliances Answer Center for service by
calling 1.800.432.2737.
Check the water temperature with a candy
or meat thermometer. Turn on the hot water
faucet nearest the dishwasher, place the
thermometer in a glass and let the water
run continuously into the glass until the
temperature stops rising.
®
• For your rinse agent dispenser, Finish
Jet-Dry ® Rinse Aid.
®