Tetratec EX 400 Manual De Instrucciones página 22

17
19
20
10
Adjusting the Water Flow
21
OUT
11
Regular Maintenance/Replacement and Cleaning of Filter Media
22
22
Set up
Push the start button on the motor head repeatedly
18
and in quick succession with the palm of your hand
until the Tetratec
Water will be siphoned through the water intake
hose and directed into the filter case. It will stop
siphoning water once the water in the flow return
pipe reaches the water surface level of the tank.
Plug in the Tetratec
fully along the flow return pipe.
Note: At this point check all components for leakage. After
operating the Tetratec
the filter is operating properly and recheck for leakage.
If water is not satisfactorily flowing through the return pipe, unplug
the filter and check the hose connections and ensure that the hose
is not tangled. Gently shaking will help to release any air trapped
inside the filter.
The water flow can be adjusted when required, for example when
IN
feeding fish.
Turn the tap of the "OUT"-adapter 45 degrees counterclockwise
to decrease the water flow.
Turning the tap 90 degrees counterclockwise will cut the water
flow entirely.
Maintenance
Warning!
Unplug the cord the of Tetratec
and cleaning the Tetratec
Please maintain and clean the filter as necessary, in order to
avoid a decrease in water flow as a result of clogging of the
filter.
® EX Filter starts pumping water.
® EX Filter. Once the power is on, water will flow
® EX Filter for 30 to 60 min check that
® EX Filter before maintenance
® EX Filter.