Tetratec EX 400 Manual De Instrucciones página 25

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
29
Shaft
Impeller
16
Affixing the Motor Head
Once cleaning is completed, ensure the filter media container is correctly aligned before affixing the motor
head (please refer to point No. 2 .
17
Assembling the Hose Adapter Unit
30
31
18
Priming Water
Prime water as described in point No. 9 .
Note: Once the water starts flowing, don't forget to readjust the water flow to the level prior to
Maintenance.
19
Plug in Tetratec EX Filter
Maintenance
Remove the impeller and shaft from the impeller case and rinse
thoroughly under warm tap water.
After cleaning, reassemble the parts in the opposite order setting
the impeller drive magnet and then the impeller cover. Twist the
cover clockwise towards "CLOSE" to securely lock the cover in
place.
Central
Insert the Hose Adaptor Unit
Lever
Note: Do not move the central lever until the hose adapter is
fixed.
Place the filter in an upright position. Insert the hose adaptor unit
into the motor head while the central lever is raised.
After inserting the adaptor unit into the motor head push the
central lever down. Open the valves of the hose adaptor again.
25

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ex 600Ex 700Ex 1200Ex 2400

Tabla de contenido