Nevir NVR-4496 CTNFS Manual De Instrucciones página 41

 The plug has become loose.
 The socket is not supplied with
energy.
 The fuse is switched off.
 The voltage is too low.
The compressor does not work at all.
 Incorrect energy supply.
The compressor operates for too long.
 The appliance has been switched
off for a while.
 Doors opened too often or too
long.
 The door was frequently opened.
 The door is not properly closed.
 Encrusted ice inside the appliance.
 The current temperature setting is
too warm
 Warm or hot beverages inside the
appliance.
 The appliance is overfilled.
 The door seals are damaged.
Strong formation of encrusted ice.
 The door is not properly closed.
 The door seal is damaged or
soiled.
The door makes a strange sound when opened.
 The door seals are soiled.
 The appliance is not installed on a
level, dry and solid floor.
 The appliance is in contact with a
wall or another item. The bottles
are incorrectly positioned.
 Some items have dropped behind
the appliance.
 If the appliance shows a malfunction not noted on the schedule above or
if you have checked all items on the above schedule but the problem still
exists, please contactthe aftersales service.
The operating procedures described below are normal
 Check the fuse box.
 Compare the data on the model
 Check the energy supply.
 The appliance needs some time to
 Do not open the door too
Unsatisfactory cooling capacity.
 Select
 Check the door/door seals.
 Defrost the appliance.
 Close the door.
 Clean/replace the door seal.
 Clean the seals.
Unusual noise.
 Realign the appliance.
 Readjust the appliance.
 Realign the bottles
 Remove these items.
and do not indicate a malfunction.
appliance.
plate with the data of your energy
supplier.
reach the preset temperature.
often/too long.
a different
necessary.
setting if