Before Initial Operation; Temperature Setting; Display Control - Nevir NVR-4496 CTNFS Manual De Instrucciones

4.2 Before initial operation

1. Clean the appliance thoroughly. Be very careful especially inside the
appliance (look at chapter
2. If the accessories inside the appliance are not fitted in their correct
position, replace them according to the image in chapter 4.
3. Use the freezer compartment 24 hours after initial operation of the
appliance.
4. The appliance must be connected to the mains properly.
5. If the appliance was disconnected from the energy supply, wait 5 minutes
before you restart it.
6. Do not overfill the appliance

4.3 Temperature setting

Display control

Use your appliance according to the following control regulations, your appliance has the
corresponding functions and modes as the control panels showed in the pictures below. When
the appliance is powered on for the first time. The backlighting of the icons on display panel
starts working. If no buttons have been pressed and the doors are closed, the backlighting will
turn off
CLEANING AND MAINTENANCE
).