Connecting Via Aux - I.SOUND DreamTime Pro Guía De Usuario

Connecting via AUX

If you are using an audio device without Bluetooth, you
can play music through the AUX jack located on the back of
DreamTime Pro.
1. Plug one end of the 3.5mm audio cable (included) into your
audio device and the other end of the cable into the "LINE-IN"
jack located on the back of DreamTime Pro.
2. Press bu on to turn on the DreamTime Pro.
3. Toggle through the bu on on the unit until you reach
AUX mode. The AUX icon will appear on the LCD display on
the le .
4. Turn on and play your audio device.
5. Press and turn on the unit to adjust the system volume.
NOTE: You may need to adjust the volume on your audio
device also.
6. Press and hold the bu on for 3 seconds to turn
DreamTime Pro o .
NOTE: You also need to turn o your audio device.
Using DreamTime Pro as a Bluetooth receiver
via AUX-OUT
1. Plug one end of the 3.5mm audio cable into the "LINE-OUT"
jack on back of the unit and other end of the cable into a "Line
in" jack of other (wired) speakers.
NOTE: Now your other speakers will function like Bluetooth
speakers! Enjoy wireless streaming music on otherwise
wired-only speakers.
2. When a 3.5mm audio cable is plugged into "LINE OUT,"