I.SOUND DreamTime Pro Guía De Usuario página 9

2. Press and hold
hour digit will begin ashing. Press
hour is displayed. Remember to set the correct AM or PM
when you choose 12 hour format for the clock display.
3. Press
bu on again. Minute digits will begin ashing. Press
and until the desired minute is displayed.
4. Press bu on again to set 2/5/7 mode .This means alarm 1
will be active on either 2, 5 or 2/5 (7) days per week. Alarm 1
will activate every day when in 2/5 days mode, Saturday and
Sunday in 2 mode, and weekdays M-F in 5 mode.
5. Press bu on again to exit the alarm se ing mode, or a er
3 seconds the display will stop ashing to indicate the alarm is set.
6. Press
top of the LCD. This indicates the wake mode of your choice:
Bluetooth, radio or beeping.
NOTE: When "Bluetooth" alarm mode is chosen, please make
sure your Bluetooth device is paired with DreamTime Pro,
otherwise the alarm will go into "Beep" mode automatically.
7. When the alarm is sounding, press any bu on on the unit to
turn the alarm o . The alarm will come on again at the same
time the next day.
NOTES:
• If the alarm sounds for 30 minutes continuously it will
automatically turn o and reset to come on again at the same
time the next day.
• To make sure the 2/5/7 alarm mode works properly, please
set the correct date.
• Do the same procedure to set ALARM 2.
bu on to enter alarm setup mode. The
bu on until the wake mode icon appears on the
and until the desired