Turning Power On/Off; Turning On The Main Power - Sharp PN-L401C Manual De Instalación

Caution
• When all connections are complete, turn on the power.
• Turn on the monitor first before turning on the computer or
playback device.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.

Turning on the main power

Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• For a complete electrical disconnection, pull out the main
plug.

Turning Power On/Off

Turning power on/off
Press the POWER button to turn the power ON/OFF.
You can also turn the power ON/OFF by pressing the
MONITOR ON button/MONITOR OFF button on the remote
control unit.
Green lit
Orange lit
Green flashing
TIPS
• When the main power switch is off, the monitor cannot be
turned on.
POWER button
TOUCH
MENU
Power LED
Status Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode
7
E